MS 3085 Series
Additional tools
Full Installation Guide
Everything you need to get your TV safely on the floor stand, in no time
There’s two versions of this product. Which one do you have?
Before you start
…we just wanted to say thanks for choosing Vogel’s. Smart choice.
And you’re already making another smart choice – reading the manual! Keep reading to learn all about safe, efficient installation, and how to use your new floor stand.
Stay safe
Warning
Always read these safety instructions carefully before installing and using this product.
Following these instructions is strictly required. Incorrect mounting and/or installation could put you, your TV, and your family at substantial risk.
- Vogel’s recommends that the mounting and/or installation of this product should be carried out by a suitably qualified expert.
- Vogel’s cannot be held responsible for any injury and/or damage caused by incorrect installation.
- Please consult the manual for your TV and ensure that the weight and size of the TV is within the maximum weight and size limits specified for this product, and that the TV mounting bolts used are of a suitable length and diameter. Note that not all the TV mounting accessories provided are required for the installation of any one TV.
- The wall mounting accessories provided are exclusively intended for installation on walls made of solid brick, solid concrete or solid wood columns.
- Any material covering the wall must not exceed 3mm/ 0.12 inch.
- For mounting on walls made of other materials, such as hollow bricks, wood panels or plasterboard, please consult your installer and/or specialist supplier.
- Clean the product with a dry, lint-free cloth. Do not use detergents or other solvents to clean the product.
- Only qualified, certified personnel may repair the product. Use only original spare parts. The use of other parts will result in voiding the warranty, and could lead to injuries.
- Alterations to the product and technical modifications are not permitted. This will void the warranty, and could lead to injuries.
- Always store the product in a dry and safe place with a temperature between -10°C to +50°C.
- Handle and transport the product with care.
- Repack the product when transporting or not using it for a longer period of time.
- Lifting your TV is a two-person job. Don’t be bold!
What’s in the box?
- Something missing? Make sure your packaging has everything in place:
- Post
- Cable clips
- Plate holders
- Strips
- Interface plate
- Bottom plate
- Instructions
- Plate bolts (large crosshead or hexagon depending on your version)
- Long interface bolts
- Strip securing bolts
- Bolts for fastening strips on TV
- M6 bolts
- M8 bolts
- Spacers
- Washers
Got your tools ready?
-
Don’t start without all the necessary tools:
- Safety glasses
- Large crosshead screwdriver
- If there’s hexagon bolts in the mounting kit: No.14 wrench
Additional tools
Ready… set… get installing!
Step 1: Attach the strips to the TV
- Carefully put the TV on a clean surface without obstacles.
- Screw the strips Ⓓ on to the TV using the bolts for fastening strips on TV Ⓚ. Use washers Ⓜ and spacers Ⓛ to adjust for any high areas on the back of the TV.
Are you missing any bolts? Or need different ones? The friendly team at Vogel’s Consumer Care are waiting to help: vogels.com/contact
Step 2: Assemble the stand
- Put the bottom plate Ⓕ between the two plate holders Ⓒ.
- Depending on your version, attach the pole Ⓐ to the bottom plate Ⓕ using the large crosshead or hexagon plate bolts Ⓗ. In case you have hexagon plate bolts, use a no. 14 wrench to carefully attach the pole. Otherwise, use a large screwdriver.
Do not over tighten the plate bolts! If the post is properly upright, do not tighten the bolts any further. Over tightening could result in a broken glass plate.
- Decide how high you want your TV to be. Aim for the centre of your TV to be at eye level. Are you unsure about the height? Try mounting the TV stand in the highest position and see if it works for your situation.
- Put the long interface bolts Ⓘ through the pole Ⓐ from the back at the desired height.
- Attach the interface plate Ⓔ to the pole Ⓐ using the long interface bolts Ⓘ.
Step 3: Attach the TV to the floor stand
- Carefully lift the TV with the top hooks of the strips Ⓓ onto the interface plate Ⓔ.
- Attach the strips Ⓓ and the TV to the interface plate Ⓔ using the strip securing bolts Ⓙ. Tighten the bolts until the strips Ⓓ are tightly attached to the interface plate Ⓔ.
Lifting your TV is a two-person job. Don’t be bold!
Job done now! Enjoy watching your TV!
Handy features
Cable management
- Put one cable clip Ⓑ in the bottom holes on the back of the pole Ⓐ.
- Put the other cable clip Ⓑ somewhere on the pole Ⓐ where it is convenient for the cables.
- Guide the cables through the cable clips Ⓑ.
Removing your TV
- Unplug the cables from your TV.
- Loosen the screws on the strips Ⓒ to release the TV.
- Lift your TV off of the interface plate Ⓔ, and put it down somewhere safe.
Again, lifting your TV is a two-person job. Always get help.
Confused? Unsure? Going crazy?
There’s plenty of help waiting for you, online:
Simple troubleshooting
Found a problem you can’t fix? Don’t panic… try these!
Problem
Cause
Solution
Problem
‘I don’t have the right bolts for my TV!’
Cause
The world of TV technology is always changing – it can be hard to keep up sometimes. So, it might be the case that the correct bolt size is not included… you’re just too advanced!
Solution
Just ask Vogel’s Consumer Care to request a service kit, and we’ll send everything you need. Click here to contact Vogel's Consumer Care.
FAQs
‘Where can I request the correct bolts for my TV (a service kit)?’
Whatever you need, simply contact your local Vogel's dealer or Vogel's. Click here to contact Vogel's Consumer Care.
‘Where can I find installation videos?’
Click or tap the button on the front page of this manual. The installation video can be found at the product page of your product on our website. It can also be found on our YouTube channel: www.youtube.com/c/VogelsForSure
‘What is VESA?’
VESA is a standard pattern of mounting location holes on the back of a TV which allows many standard TV mounts to be easily fitted to your TV.
Go green!
We care about the planet. If you’re getting rid of the packaging or the TV mount itself, please check your municipality’s guidelines for the best disposal options near you. For information about the materials used in the packaging, visit www.vogels.com/recycle. Recycling matters!
Guarantee
Thanks again for choosing Vogel’s! Durability is paramount in the development and production of our products.
If your product is not functioning properly due to material faults or manufacturing defects, we will repair it free of charge or replace it at our own discretion.
If you have any problems with our product or want to know whether the guarantee is applicable, please:
- Complete the contact form or mail our Consumer Care Team. Preferably, please add a picture.
- Within 2 business days you will be contacted by our local Vogel’s distributor.
- If the guarantee is invoked, the product should be returned, together with the original purchase document (invoice, sales slip or cash receipt). The purchase document should clearly show the name of the supplier and the date of purchase. You will be informed about the specific return address and further procedure.
- If the product has not been installed or used in accordance with the instructions;
- If applicable, if the holes in the wall have not been properly drilled in accordance with the Vogel's installation instructions for the applicable wall type;
- If the product has been altered or repaired by someone other than Vogel’s;
- If a fault arises due to external causes (outside the product) such as for example lightning, water nuisance, fire, scuffing, exposure to extreme temperatures, weather conditions, solvents or acids, wrong use or negligence;
- If the product is used for different equipment than is mentioned on or in the packaging.
Vogel’s guarantee shall lapse in the following cases:
Do you have any other questions? Please make use of our contact form.
Before you start
…we just wanted to say thanks for choosing Vogel’s. Smart choice.
And you’re already making another smart choice – reading the manual! Keep reading to learn all about safe, efficient installation, and how to use your new floor stand.
Stay safe
Warning
Always read these safety instructions carefully before installing and using this product.
Following these instructions is strictly required. Incorrect mounting and/or installation could put you, your TV, and your family at substantial risk.
- Vogel’s recommends that the mounting and/or installation of this product should be carried out by a suitably qualified expert.
- Vogel’s cannot be held responsible for any injury and/or damage caused by incorrect installation.
- Please consult the manual for your TV and ensure that the weight and size of the TV is within the maximum weight and size limits specified for this product, and that the TV mounting bolts used are of a suitable length and diameter. Note that not all the TV mounting accessories provided are required for the installation of any one TV.
- The wall mounting accessories provided are exclusively intended for installation on walls made of solid brick, solid concrete or solid wood columns.
- Any material covering the wall must not exceed 3mm/ 0.12 inch.
- For mounting on walls made of other materials, such as hollow bricks, wood panels or plasterboard, please consult your installer and/or specialist supplier.
- Clean the product with a dry, lint-free cloth. Do not use detergents or other solvents to clean the product.
- Only qualified, certified personnel may repair the product. Use only original spare parts. The use of other parts will result in voiding the warranty, and could lead to injuries.
- Alterations to the product and technical modifications are not permitted. This will void the warranty, and could lead to injuries.
- Always store the product in a dry and safe place with a temperature between -10°C to +50°C.
- Handle and transport the product with care.
- Repack the product when transporting or not using it for a longer period of time.
- Lifting your TV is a two-person job. Don’t be bold!
What’s in the box?
- Something missing? Make sure your packaging has everything in place:
- Post
- Cable clips
- Plate holder
- Strips
- Interface plate
- Bottom plate
- Instructions
- Plate bolts (hexagonal)
- Long interface bolts
- Strip securing bolts
- Bolts for fastening strips on TV
- M6 bolts
- M8 bolts
- Spacers
- Washers
- Plastic plate holder
Got your tools ready?
-
Don’t start without all the necessary tools:
- Safety glasses
- Large crosshead screwdriver
- No.10 wrench
Additional tools
Ready… set… get installing!
Step 1: Attach the strips to the TV
- Carefully put the TV on a clean surface without obstacles.
- Screw the strips Ⓓ on to the TV using the bolts for fastening strips on TV Ⓚ. Use washers Ⓜ and spacers Ⓛ to adjust for any high areas on the back of the TV.
Are you missing any bolts? Or need different ones? The friendly team at Vogel’s Consumer Care are waiting to help: vogels.com/contact
Step 2: Assemble the stand
- Put the metal plate holder Ⓒ on the bottom side of bottom plate Ⓕ, and the plastic plate holder Ⓝ on the top side.
- Attach the pole Ⓐ to the bottom plate Ⓕ using the hexagonal plate bolts Ⓗ.
Do not over tighten the plate bolts! If the post is properly upright, do not tighten the bolts any further. Over tightening could result in a broken glass plate.
- Decide how high you want your TV to be. Aim for the centre of your TV to be at eye level. Are you unsure about the height? Try mounting the TV stand in the highest position and see if it works for your situation.
- Put the long interface bolts Ⓘ through the pole Ⓐ from the back at the desired height.
- Attach the interface plate Ⓔ to the pole Ⓐ using the long interface bolts Ⓘ.
Step 3: Attach the TV to the floor stand
- Carefully lift the TV with the top hooks of the strips Ⓓ onto the interface plate Ⓔ.
- Attach the strips Ⓓ and the TV to the interface plate Ⓔ using the strip securing bolts Ⓙ. Tighten the bolts until the strips Ⓓ are tightly attached to the interface plate Ⓔ.
Lifting your TV is a two-person job. Don’t be bold!
Job done now! Enjoy watching your TV!
Handy features
Cable management
- Put one cable clip Ⓑ in the bottom holes on the back of the pole Ⓐ.
- Put the other cable clip Ⓑ somewhere on the pole Ⓐ where it is convenient for the cables.
- Guide the cables through the cable clips Ⓑ.
Removing your TV
- Unplug the cables from your TV.
- Loosen the screws on the strips Ⓒ to release the TV.
- Lift your TV off of the interface plate Ⓔ, and put it down somewhere safe.
Again, lifting your TV is a two-person job. Always get help.
Confused? Unsure? Going crazy?
There’s plenty of help waiting for you, online:
Simple troubleshooting
Found a problem you can’t fix? Don’t panic… try these!
Problem
Cause
Solution
Problem
‘I don’t have the right bolts for my TV!’
Cause
The world of TV technology is always changing – it can be hard to keep up sometimes. So, it might be the case that the correct bolt size is not included… you’re just too advanced!
Solution
Just ask Vogel’s Consumer Care to request a service kit, and we’ll send everything you need. Click here to contact Vogel's Consumer Care.
FAQs
‘Where can I request the correct bolts for my TV (a service kit)?’
Whatever you need, simply contact your local Vogel's dealer or Vogel's. Click here to contact Vogel's Consumer Care.
‘Where can I find installation videos?’
Click or tap the button on the front page of this manual. The installation video can be found at the product page of your product on our website. It can also be found on our YouTube channel: www.youtube.com/c/VogelsForSure
‘What is VESA?’
VESA is a standard pattern of mounting location holes on the back of a TV which allows many standard TV mounts to be easily fitted to your TV.
Go green!
We care about the planet. If you’re getting rid of the packaging or the TV mount itself, please check your municipality’s guidelines for the best disposal options near you. For information about the materials used in the packaging, visit www.vogels.com/recycle. Recycling matters!
Guarantee
Thanks again for choosing Vogel’s! Durability is paramount in the development and production of our products.
If your product is not functioning properly due to material faults or manufacturing defects, we will repair it free of charge or replace it at our own discretion.
If you have any problems with our product or want to know whether the guarantee is applicable, please:
- Complete the contact form or mail our Consumer Care Team. Preferably, please add a picture.
- Within 2 business days you will be contacted by our local Vogel’s distributor.
- If the guarantee is invoked, the product should be returned, together with the original purchase document (invoice, sales slip or cash receipt). The purchase document should clearly show the name of the supplier and the date of purchase. You will be informed about the specific return address and further procedure.
- If the product has not been installed or used in accordance with the instructions;
- If applicable, if the holes in the wall have not been properly drilled in accordance with the Vogel's installation instructions for the applicable wall type;
- If the product has been altered or repaired by someone other than Vogel’s;
- If a fault arises due to external causes (outside the product) such as for example lightning, water nuisance, fire, scuffing, exposure to extreme temperatures, weather conditions, solvents or acids, wrong use or negligence;
- If the product is used for different equipment than is mentioned on or in the packaging.
Vogel’s guarantee shall lapse in the following cases:
Do you have any other questions? Please make use of our contact form.
Vogel’s Products BV - Hondsruglaan 93 - 5628 DB Eindhoven - The Netherlands
Vogel’s Products BV 2024 © All rights reserved.