TVA 7000
Cable Cover

Additional tools

Full Installation Guide

Everything you need to guide your cables out of sight, in no time.

Before you start

…we just wanted to say thanks for choosing Vogel’s. Smart choice.

And you’re already making another smart choice – reading the manual! Keep reading to learn all about safe, efficient installation, and how to use your new accessory.

 

What’s in your box?

  • Something missing? Make sure your packaging has everything in place:
    1. Cable cover mount
    2. Cable cover lid
    3. End clips
    4. Screws
    5. Plugs
 

Got your tools ready?

  • Don’t start without all the necessary tools:

    • Crosshead screwdriver
    • Drilling machine
    • 5mm or 13/64" concrete / brick drill (for concrete / brick walls only)
    • Stud finder (for walls with wooden studs only)
    • Metal saw (optional)
    • Spirit level
    • Pencil
 

Additional tools

Let our pdf guide you
Download a pdf version of this installation guide including guarantee conditions.
 

Ready… set… get installing!

Step 1: Attach the cable cover mount to the wall

How well do you know your walls? What they’re made of matters more than you think.

  1. Don’t just guess! Always use a stud finder to determine the position of studs.
  2. Hold the cable cover mount Ⓐ against the wall and mark the location of the holes. Use a spirit level to level the cable cover mount Ⓐ.
  3. Attach the cable cover mount Ⓐ to the wall with the screws Ⓓ.
  1. Hold the cable cover mount Ⓐ against the wall and mark the location of the holes. Use a spirit level to level the cable cover mount Ⓐ.
  1. Drill the holes.

Do not use the cable cover as a drill guide.

  1. Attach the cable cover mount Ⓐ to the wall with the screws Ⓓ, and plugs Ⓔ. Use the spirit level to level the cable cover mount Ⓐ.
 

Step 2: Put the cables in the cable cover

  1. Organise the cables.
 

Step 3: Put on the cable cover

  1. Place the cable cover lid Ⓑ on the cable cover mount Ⓐ.
  2. Put the end clips Ⓒ on the cable cover lid Ⓑ.

Is our colour not to your liking? No worries! You can paint the cable cover lid to any colour of your preference.

Job done now! Enjoy watching your TV!

 

Handy features

Cut it easily to your desired length

  1. Draw a straight line across the cable cover mount Ⓐ at the desired length.
  1. Cut the cable cover mount Ⓐ along the drawn line.
  1. Use the cable cover mount Ⓐ as a guide to draw a line on the cable cover lid Ⓑ.
  2. Repeat the cuts on the cable cover lid Ⓑ.

Seamless fit with Vogel’s TVM 7655/7675

  1. Put the wall mount cover of the TVM 7655/7675 over the cable cover for a seamless fit.
 

Did it work?

 

Confused? Unsure? Going crazy?

There’s plenty of help waiting for you, online:

 

Simple troubleshooting

Found a problem you can’t fix? Don’t panic… try these!

Problem

Cause

Solution

Problem

‘My wall screws have snapped!’

Cause

You might not be drilling deep enough… or your drill could be too blunt, so that the hole is too narrow and the screw gets stuck.

Solution

Use another hole in the wall plate to fix the cable cover mount to the wall. Make sure you use a sharp drill of the correct size. Use the size of the screw as indication of the depth to be drilled.

 

FAQs

‘What if I need spare parts?’

If you require a spare part, please contact your local dealer or Vogel's. Click here to contact Vogel's Consumer Care.

‘Why do you use Fischer© plugs?’

The Fischer© DuoPower plug is widely regarded as the best standard in plugs. Don’t settle for less!

 

Go green!

We care about the planet. If you’re getting rid of the packaging or the TV mount itself, please visit your local recycling facility, or contact your municipal office. Recycling matters!

 

Guarantee

Thanks again for choosing Vogel’s! Durability is paramount in the development and production of our products. We provide a guarantee of 2 years, unless local statutory law and regulation dictate a longer minimum period. We resolve any issues regarding product complaints or returned products and assess all complaints based on usage.

If your product is not functioning properly due to material faults or manufacturing defects, we will repair it free of charge or replace it at our own discretion.

If you have any problems with our product or want to know whether the guarantee is applicable, please:

  1. Complete the contact form or mail our Consumer Care Team. Preferably, please add a picture.
  2. Within 2 business days you will be contacted by our local Vogel’s distributor.
  3. If the guarantee is invoked, the product should be returned, together with the original purchase document (invoice, sales slip or cash receipt). The purchase document should clearly show the name of the supplier and the date of purchase. You will be informed about the specific return address and further procedure.

    4. Vogel’s guarantee shall lapse in the following cases:

    • If the product has not been installed or used in accordance with the instructions;
    • If applicable, if the holes in the wall have not been properly drilled in accordance with the Vogel's installation instructions for the applicable wall type;
    • If the product has been altered or repaired by someone other than Vogel’s;
    • If a fault arises due to external causes (outside the product) such as for example lightning, water nuisance, fire, scuffing, exposure to extreme temperatures, weather conditions, solvents or acids, wrong use or negligence;
    • If the product is used for different equipment than is mentioned on or in the packaging.

Do you have any other questions? Please make use of our contact form.

 

Vogel’s Products BV - Hondsruglaan 93 - 5628 DB Eindhoven - The Netherlands

Vogel’s Products BV 2023 © All rights reserved.