TVM 3420 Series

TVM 3440 Series

TVM 3620 Series

TVM 3640 Series

Additional tools

Full Installation Guide

Everything you need to get your TV safely on the wall, in no time

Before you start

…we just wanted to say thanks for choosing Vogel’s. Smart choice.

And you’re already making another smart choice – reading the manual! Keep reading to learn all about safe, efficient installation, and how to use your new mount.

 

Stay safe

Warning

Always read these safety instructions carefully before installing and using this product.

Following these instructions is strictly required. Incorrect mounting and/or installation could put you, your TV, and your family at substantial risk.

 

What’s in your box?

  • Something missing? Make sure your packaging has everything in place:
    1. Wall mount
    2. Horizontal bars
    1. Vertical strips
    1. Safety instructions
    2. Bolts for fastening strips on TV (see contents below)
    3. Spacers
    4. Washers Ø 18 mm
    5. Screws
    6. Plugs (fischer© DuoPower)
    7. Washers Ø 22 mm
    8. Covers
    9. Protective TV patches
    10. Cable clip or clips (depending on model)
    11. Cable clip for wall plate
    12. Spirit level
    13. Thumbnuts (pre-attached to horizontal bars for some models)
  • Contents of the TV fasteners kit:
    • 4x M6*12mm bolts
    • 4x M6*25mm bolts
    • 4x M6*35mm bolts
    • 4x M8*12mm bolts
    • 4x M8*25mm bolts
    • 4x M8*45mm bolts
    • 4x M6 washer
    • 4x spacer 10mm
    • 4x spacer 5mm

You just need four bolts to mount your TV. Store the rest for other use!

 

Got your tools ready?

  • Don’t start without all the necessary tools:

    • Crosshead screwdriver
    • Drilling machine
    • 10 mm or 25/64” concrete / brick drill (for concrete / brick walls only)
    • 5 mm or 13/64” concrete / brick drill (for concrete / brick walls only)
    • 5 mm or 13/64” wood drill (for walls with wooden studs only)
    • Stud finder (for walls with wooden studs only)
    • Socket wrench no. 13
    • Pencil
    • M4 (4mm) Allen key
 

Take care of your safety

  • Who cares about looking cool? Always wear personal protective equipment:
    • Eye protection
    • Ear protection
    • Safety shoes

Lifting your TV is a two-person job. Don’t be bold!

 

Additional tools

Mark the first drilling hole
Use our free DrillRight™ AR App to find the perfect mounting height.

 

Let our video guide you
No more stress. Watch and learn, with our handy online installation video.

 

Let our pdf guide you
Download a pdf version of this installation guide including guarantee conditions.
 

Ready… set… get installing!

Step 1: Attach the strips to the TV

  1. Carefully place the TV face down, on a soft clean surface without any obstacles.
  2. Fix the protective TV patches Ⓛ onto the vertical strips Ⓒ. Screw the strips Ⓒ onto the TV with the bolts Ⓔ. Make sure the strips Ⓒ are at the same height and do not stick out.

Are you missing any bolts? Or need different ones? The friendly team at Vogel’s Consumer Care are waiting to help: vogels.com/contact

Refer to the user manual of your TV for the correct bolt sizes. Make sure bolts and washers are positioned correctly. Use spacers where needed.

  1. Loosen the pre-attached bolts Ⓒ with the allen key Ⓞ.
  2. For models where the thumbnuts are pre-attached: remove both thumbnuts Ⓟ from the horizontal bars Ⓑ.
  3. Slide the horizontal bars Ⓑ through the designated spacing of the vertical strips Ⓒ. Make sure the bars Ⓑ are placed in a centered position. Notice the holes on the side of the bars Ⓑ. They need to face downwards.
  4. Attach both bars Ⓑ to the strips by tightening the pre-attached bolts Ⓒ with the allen key Ⓞ.
  5. Screw one thumbnut Ⓟ into the upper bar. Make sure you don’t screw it in completely, yet.
 

Step 2: Attach the wall mount to the wall

How well do you know your walls? What they’re made of matters more than you think…

 

Step 3: Attach the TV to the wall mount

  1. Carefully lift and attach the TV to the wall mount Ⓐ. Place the upper thumbnut Ⓟ in the top notch of the wall mount.
  1. Position the bottom thumbnut through the hole in the wall mount and in the bottom bar.
  2. Fasten both thumbnuts Ⓟ, optionally with an allen key. Make sure the TV is leveled, using the spirit level.

Lifting your TV is a two-person job. Don’t be bold!

Job done now! Enjoy watching your TV!

 

Handy features

Having a cable mess? Do you need inspiration about how to hide and guide your cables or how to place other TV accessories? Take a look at our website vogels.com!

Vertical and horizontal correction

  1. Vertical correction: If the tilt option is not used and the screen still tilts downwards / upwards: tighten / loosen screw Ⓢ with an allen key until the screen is vertically leveled.
  2. Horizontal correction: If one side of the TV is lower than the other, slightly loosen the bottom thumbnut Ⓟ. Level the TV and check with a spirit level on top of the TV. Tighten the thumbnut again, preferably with an allen key.

Tilt to avoid reflections

  1. Click the TiltAnchor™ button to release the TV from home position.
  2. Adjust the tilt angle. Gently pull the top of the screen forward.

Do not force the screen in the other direction.

Guide your cables

  1. Guide the cables.
  2. Place the cable clip Ⓜ over the cables on the lower arm.
  3. Place the wall cable clip Ⓝ over the cables on the wall plate.
 

Removing your TV

  1. Remove the lower thumbnut Ⓟ and loosen the upper thumbnut Ⓟ.
  2. Remove the TV, and put it down somewhere safe.

Again, lifting your TV is a two-person job. Always get help.

 

Did it work?

 

Confused? Unsure? Going crazy?

There’s plenty of help waiting for you, online:

 

Simple troubleshooting

Found a problem you can’t fix? Don’t panic… try these!

Problem

Cause

Solution

Problem

‘There are stains on the arms of the wall mount’

Cause

The stains are caused by the paper pulp interior in the box. We decided to reduce the amount of plastic in the packaging and therefore there is no plastic bag around the product anymore to prevent from some paper dust on the product. So, these stains might occur.

Solution

The stains are easy to remove with a cloth.

Problem

‘My TV does not remain leveled horizontally, with moving / turning it’

Cause

When you level your TV and tighten the thumbnut by hand, it might not be tight enough to stay level.

Solution

Level the TV with a spirit level and tighten the thumbnut thoroughly with a 4 mm allen key, instead of by hand.

Problem

‘I don’t have the right bolts for my TV!’

Cause

The world of TV technology is always changing – it can be hard to keep up sometimes. So, it might be the case that the correct bolt size is not included… you’re just too advanced!

Solution

Just ask Vogel’s Consumer Care to request a service kit, and we’ll send everything you need. Click here to contact Vogel's Consumer Care.

Problem

‘I have a lot of leftover bolts, is something wrong?’

Cause

No, you did it very well! You only need 4 bolts to install the mount to your TV. Because of all the different types of TVs, we have included the most common sizes for the most sold TVs.

Solution

Don’t waste the other bolts, save them!

You can use them for another TV when you buy a new one or use it elsewhere.

Problem

‘My wall screws have snapped!’

Cause

You might not be drilling deep enough… or your drill could be too blunt, so that the hole is too narrow and the screw gets stuck.

Solution

Use another hole in the wall plate to fix the wall mount to the wall. Make sure you use a sharp drill of the correct size. Use the size of the screw as indication of the depth to be drilled.

 

FAQs

‘Where can I request the correct bolts for my TV (a service kit)?’

Whatever you need, simply contact your local Vogel's dealer or Vogel's. Click here to contact Vogel's Consumer Care.

‘Where can I find installation videos?’

Click or tap the button on the front page of this manual. The installation video can be found at the product page of your product on our website. It can also be found on our YouTube channel: www.youtube.com/c/VogelsForSure

‘What if I need spare parts?’

If you require a spare part, please contact your local dealer or Vogel's. Click here to contact Vogel's Consumer Care.

‘Where can I find the drilling template?’

The drilling template is printed on the inlay card in the box. You can cut it out for your convenience.

‘How high do I need to hang my TV?’

The center of your TV should ideally be positioned at eye level, while seated. Download and use the free DrillRight™ AR app to determine the height of the TV and to mark the first hole.

‘How high do I need to hang my TV in case of a tilt mount?’

When a wall mount with tilt function is used, your TV can be mounted above eye level.

‘Which bolts or screws do I need to use?’

Use all wall screws and four bolts for securing your TV. Vogel's offers a complete assembly kit with all mounting materials included in the box, for both your TV and wall. Do you miss the correct bolts for your TV? Please contact your local Vogel's dealer. Click here to contact Vogel's Consumer Care.

‘Why do you use Fischer© plugs?’

The Fischer© DuoPower plug is widely regarded as the best standard in plugs. Don’t settle for less!

‘What is VESA?’

VESA is a standard pattern of mounting location holes on the back of a TV which allows many standard TV mounts to be easily fitted to your TV.

 

Go green!

We care about the planet. If you’re getting rid of the packaging or the TV mount itself, please visit your local recycling facility, or contact your municipal office. Recycling matters!

 

Guarantee

Thanks again for choosing Vogel’s! Durability is paramount in the development and production of our products. For this reason, we are able to provide a product guarantee for the reasonable service life of all of our wall mounts. We resolve any issues regarding product complaints or returned products and assess all complaints based on usage.

If your product is not functioning properly due to material faults or manufacturing defects, we will repair it free of charge or replace it at our own discretion.

If you have any problems with our product or want to know whether the guarantee is applicable, please:

  1. Complete the contact form or mail our Consumer Care Team. Preferably, please add a picture.
  2. Within 2 business days you will be contacted by our local Vogel’s distributor.
  3. If the guarantee is invoked, the product should be returned, together with the original purchase document (invoice, sales slip or cash receipt). The purchase document should clearly show the name of the supplier and the date of purchase. You will be informed about the specific return address and further procedure.
  4. Vogel’s guarantee shall lapse in the following cases:

    • If the product has not been installed or used in accordance with the instructions;
    • If applicable, if the holes in the wall have not been properly drilled in accordance with the Vogel's installation instructions for the applicable wall type;
    • If the product has been altered or repaired by someone other than Vogel’s;
    • If a fault arises due to external causes (outside the product) such as for example lightning, water nuisance, fire, scuffing, exposure to extreme temperatures, weather conditions, solvents or acids, wrong use or negligence;
    • If the product is used for different equipment than is mentioned on or in the packaging.

Do you have any other questions? Please make use of our contact form.

 

Vogel’s Products BV - Hondsruglaan 93 - 5628 DB Eindhoven - The Netherlands

Vogel’s Products BV 2023 © All rights reserved.